Metal Helicopter Hangar Steel Structures
Metal helicopter hangar steel structures building is one kind of prefabricated portal steel strucre building, the main frame is steel column ,steel beam ,cladding sheet, sliding door , it is also single span, the height also reaches to 10 m, it also includes the maintenance area in it.
For the Metal Helicopter Hangar Steel Structures Building, we will also design it with the portal frame structure ,.,it can storage many different model helicopter planes, we design it according to the client’s different demand , But one rule is that we must keep this storage have a high large space inside , so we will not put too many inside columns , that means we need to produce the long H beams , our architecture will calculate the possibility of length of this beam , to make sure the long span of the storage.
For the roof&wall system, we will use sandwich panel : EPS ,ROCK WOOL ,GLASS WOOL Sandwich panel.
Please check the material we use:
the construction materials List
|1||Steel beam and column||Welded steel H-section Twice anti-rust pain||Q345B，twice primer and finish paint|
|2||Crane girder||Welded steel H-section Twice anti-rust pain||Q345B，twice primer and finish paint|
|3||Roof purlin||C200*70*20*2.5 Twice anti-rust paint||Q235B，galvanized|
|4||Wall purlin||C200*70*20*2.5 Twice anti-rust paint||Q235B，galvanized|
|2||Anchor bolt||M36with 3 nuts|
|3||High strength bolt||M20*75(10.9S)with one nut and two gasket|
|4||Normal bolt||M16*45(4.6S)with one nut and two gasket|
|5||Normal bolt||M12*35(4.6S)with one nut and two gasket|
|C||Roof system &wall system|
|1||Roof panel||820type,0.5mm steel sheet||75mm Polyurethane sandwich panel|
|2||Wall panel||820type,0.5mm steel sheet||0.5mm thick color galvanized steel sheet|
|3||edge cover||0.5mm color steel sheet||0.5mm thick color galvanized steel sheet|
|5||Eave draining gutter||0.5mm color steel sheet|